io.github.ZacharyVorsteg/provenplaza-agent-mcp

up checked 2026-11-11T04:37:23.419Z

Unclaimed · Unverified

Agent searches it appeared in, last 30 days: 0. Run this server? Claim the listing: verified label, uptime alerts and analytics.

Publisher-provided title

Proven Plaza Calculators & Open Data

Publisher-provided description

29 free construction calculators plus Florida contractor, permit, federal award and AI-crawler data.

Summary by lookupd

Runs 29 construction and home-improvement calculators (materials, sizing, pool volume, electrical) and returns Florida contractor and…

Install

Claude Code, remote (streamable-http)

claude mcp add --transport http provenplaza-agent https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp

Codex, remote (streamable-http)

codex mcp add provenplaza-agent --url https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp

Cursor, remote (streamable-http) → .cursor/mcp.json

{
  "mcpServers": {
    "provenplaza-agent": {
      "url": "https://provenplaza-agent-mcp.zvorsteg1.workers.dev/mcp"
    }
  }
}

Other clients: docs. Or tell your agent: Set up lookupd for me: read https://lookupd.com/agent.md and follow it.

Tools (showing 30 of 72)

Publisher-provided text

calc_concrete_slab Estimate ready-mix cubic yards or the number of 80 lb bags for a rectangular slab, patio or driveway. Formula: Cubic yards = Length(ft) × Width(ft) × Thickness(
calc_concrete_column Concrete needed for round columns, piers and tube forms (sonotubes). Uses cylinder volume, which differs from slab math. Formula: Cubic feet = π × (diameter(in)
calc_concrete_footing Volume for continuous trench/wall footings where width is in inches and length runs the full perimeter. Formula: Cubic yards = Length(ft) × Width(in)/12 × Depth
calc_paint Gallons of wall paint from room perimeter and height, minus doors and windows, for any number of coats. Formula: Paintable area = perimeter × height − 20 sq ft
calc_roofing Roof area from the house footprint and pitch, converted to roofing squares (100 sq ft) and shingle bundles. Formula: Pitch factor = √(1 + (rise/12)²). Roof area
calc_drywall Number of drywall sheets for walls and optionally the ceiling. Formula: Sheets = (perimeter × height + ceiling area) × (1 + waste%) ÷ sheet area.
calc_flooring_tile Square footage plus waste and number of boxes for tile, laminate, vinyl plank or hardwood. Formula: Area = L × W; to buy = area × (1 + waste%); boxes = to buy ÷
calc_mulch_gravel Cubic yards (and optional tons) of mulch, gravel, sand or soil for a bed or path. Formula: Cubic yards = L(ft) × W(ft) × depth(in) ÷ 324 (since 27 cu ft × 12 in
calc_voltage_drop Voltage drop for a single- or three-phase run using NEC Chapter 9 Table 8 conductor sizes. Formula: VD = 2 × K × I × L ÷ CM (single phase) or √3 × K × I × L ÷ C
calc_ac_btu Room air-conditioner capacity using the ENERGY STAR sizing chart and its adjustments for sun, occupants and kitchens. Formula: Base BTU from the ENERGY STAR are
calc_deck_board Number of deck boards for a rectangular deck, accounting for board width and gap. Formula: Rows = ⌈width(in) ÷ (board width + gap)⌉; boards = rows × ⌈deck lengt
calc_fence Posts, rails and pickets for a straight run of wood privacy or picket fence. Formula: Sections = ⌈length ÷ spacing⌉; posts = sections + 1 + gates; pickets = ⌈le
calc_insulation_r_value Thickness needed to reach a target R-value for the R-per-inch printed on your insulation product. Formula: Thickness(in) = target R ÷ R per inch. Volume in boar
calc_pool_volume Gallons in a rectangular pool with a sloped bottom, using average depth. Formula: Gallons = L × W × (shallow + deep)/2 × 7.48052 gal/cu ft.
calc_round_pool_volume Gallons in a round or above-ground pool. Formula: Gallons = π × (D/2)² × average depth × 7.48052 (≈ D² × depth × 5.875).
calc_oval_pool_volume Gallons in an oval (elliptical) pool. Formula: Gallons = π × (L/2) × (W/2) × average depth × 7.48052.
calc_solar_panel Panels needed to offset annual electricity use, from panel wattage, peak sun hours and system losses. Formula: Annual kWh per panel = W/1000 × peak sun hours ×
calc_board_foot Board feet and cost for hardwood or dimensional lumber. Formula: Board feet = thickness(in) × width(in) × length(ft) ÷ 12 × pieces (one board foot = 144 cubic i
calc_asphalt Tons of hot-mix asphalt for a driveway or lot from area, compacted depth and mix density. Formula: Tons = L × W × depth(in)/12 × density(lb/cu ft) ÷ 2,000.
calc_stair_stringer Number of risers and treads, exact riser height, total run and stringer length from the floor-to-floor rise, checked against the IRC 7¾ in maximum riser. Formul
calc_rafter_length Common rafter length, ridge rise and roof angle from the horizontal run and pitch, with optional overhang. Formula: Pitch factor = √(1 + (rise/12)²). Rafter len
calc_wall_stud Studs at 16 or 24 in on center for a wall length, plus extras for corners and openings, and linear feet of top and bottom plate. Formula: Studs on layout = ⌈len
calc_brick Bricks for a single-wythe wall from its area, the brick face size and the mortar joint. Defaults are a modular brick with a ⅜ in joint. Formula: Bricks per sq f
calc_concrete_block Number of 8×8×16 concrete blocks (CMU) for a wall. A standard block plus a ⅜ in joint covers 16 × 8 in, so about 1.125 blocks per square foot. Formula: Blocks p
calc_paver Number of pavers for a patio, walkway or driveway plus cubic yards of compacted base and bedding sand. Formula: Pavers per sq ft = 144 ÷ (paver length × width);
calc_sod Square feet of sod, number of pieces and pallets for a lawn area. Piece size and pallet coverage are editable because they vary by farm and grass type. Formula:
calc_pool_salt Pounds and bags of pool salt to raise a saltwater pool from its current salt level to the target your chlorine generator needs. Formula: Salt (lb) = gallons × 8
calc_pool_chlorine Fluid ounces of liquid chlorine (sodium hypochlorite) to raise free chlorine by a target number of ppm, from pool volume and product strength. Formula: Availabl
calc_generator_size What size generator you need for a power outage: add the running watts of everything you will run at once, then add the single biggest motor starting surge. Ent
calc_rebar How much rebar a rectangular slab grid needs: bar count each way, lap splices, total linear feet, 20 ft sticks to order and steel weight from ASTM A615 bar weig

Details

Version: 0.1.2
Transports: streamable-http
Uptime (7 days): 100%
Median latency: 531 ms
First indexed: 2026-11-01T09:18:35.180Z
Last seen in registry: 2026-11-01T09:18:35.190Z
Repository: https://github.com/ZacharyVorsteg/provenplaza-agent-mcp

Badge for your README

Shows this live status and links here; updates hourly.

[![lookupd status](https://lookupd.com/badge/io.github.ZacharyVorsteg/provenplaza-agent-mcp.svg)](https://lookupd.com/servers/io.github.ZacharyVorsteg/provenplaza-agent-mcp)

62174 servers
Last crawl: 2026-11-11T19:17:20.153Z
API base: https://api.lookupd.com
MCP URL: https://api.lookupd.com/mcp